How do you know if a gemstone is real or fake? Below, we dive into five key principles to help you become an educated buyer - ready to enter the world of rare coloured precious gems, prepared and confident.
To help you know what answers to look for, here are some things to consider when buying loose gemstones or a gemstone jewellery piece:
Although this is a tricky question to answer, there is one piece of advice you always need to keep in mind:
If you don’t know your stones, know your seller.
And a good place to start ‘testing’ your seller is by asking these 4 questions:
- Could I see other similar stones?
- Is this stone natural or synthetic?
- If the previous answer was ‘natural’, ask: Has this stone been treated?
- Can I get an independent gemological lab certificate?
To give you some more insights as to what you should look for in the answers given to you, I have summed up 5 things for you to keep in mind when buying loose coloured gemstones or a gemstone piece:
1. Get To Know The Names Of The Best Quality Gemstones
You may be surprised to know that there are other fine quality gemstones besides the three most well-known coloured stones: emerald, ruby and blue sapphire.
For example, the exquisite grass-green tsavorite garnet which can easily beat the emerald in quality… And other fine quality green gems are: the demantoid garnet, green beryl, lagoon or neon mint tourmaline, peridot and sphene.
The same applies to the red hue: can you name other high-quality varieties besides the ruby? (Like red spinel, reddish tourmaline and garnet...).
Do you know any yellow gemstones, blue ones or even neon pink ones?
It pays off to first do some research online or buy a book on coloured gems so you’ll be aware of the high-quality gemstones available.
Your gemstone dealer or jeweller will thank you for it as you’ll be able to articulate what you want and the colours you like.
2. Learn The Difference Between Natural, Synthetic, Man-made and Fake Gems
It’s helpful to know these distinctions before you enter a gem dealer’s office or jewellery store. So let’s dive into some gemological definitions of each.
A natural gem is any gemstone that is entirely the product of nature. It’s unaltered by humans in any way, except for ordinary cutting and polishing.
A synthetic gem is the same as a natural gem (in terms of physical, chemical and optical properties), EXCEPT that it has been made by humans.
For instance, synthetic diamonds, rubies and blue sapphires are just a few common synthetic gems that exist. These synthetic stones you could call the 'fakes'. But there is actually nothing wrong with them as long as you’re aware of it and you paid a lower price.
Man-made gems are the same as synthetic gems - with a subtle yet important difference - they don’t have a natural counterpart.
Synthetic gems always have a natural counterpart, such as synthetic diamond, synthetic ruby, etc. while man-made gems are basically invented by humans but don’t exist as such in nature.
Examples are the man-made diamond simulants YAG and GGG.
Fine natural gemstones are the rarest and will be the most valuable of all of the above.
It’s good to know about these distinctions as it’ll make you ask the right questions and it’ll make you appreciate a highly valued natural gemstone even more.
If you’d like to discover the perfect stone for you, you can also take my quiz and find out!
BECOME AN INSIDER
Be the first to get access to new gem treasures, insights and offers & events 💎
3. Be Aware Of Gemstone Treatments
Synthetics, fakes, natural gemstones and now you mention gemstone treatments?...
So, what is a treated gemstone?
A treated gem is when a gemstone has been altered by humans, in addition to the ordinary cutting and polishing. Treatments are very common in gemstones, including diamonds. Most consumers though are not aware of them or they automatically assume the word treatment has a negative connotation.
This is not always deserved for all treatments!
The reason treatments exist is simple: without gemstone treatments, there wouldn’t even be enough quality coloured gemstone stones in nature to satisfy the jewellery demand in the world...
Yep, you heard that right.
When you take for instance, blue sapphires and rubies. The demand for these gorgeous stones is far greater than what Mother Nature can supply. Or in good jewellery-quality at least…
For that reason, 95% of natural rubies and blue sapphires have been heat-treated!
In order to turn a lower quality stone into a higher quality one.
Heat treatment is a fully acceptable treatment in the gem market by the way.
Likewise, most emeralds are oiled and fracture-filled (which treatments are not always acceptable but let’s save that for another blogpost…).
Then there exist some other treatments, like irradiation (accepted for certain stones but less acceptable for others) and lattice diffusion (which most reputable gem dealers don’t accept).
And don’t forget that also diamonds can be subjected to certain treatments, such as laser-drilling and fracture-filling!
However, many treatments get lumped together under the blanket term “enhanced” which makes it difficult to understand what specific type of treatment has been carried out and also whether it would be acceptable to a reputable gemstone dealer or not.
Always try to get a specific answer from your gemstone vendor. It's important to know specifics about a treated stone and to ask your gemstone vendor about his/her policy on treatments.
In general, a treated stone should be less expensive than a similar, untreated gemstone and on top of that, some treatments are simply not acceptable to a good gem dealer. Ask your vendor!
4. Learn To Judge A Coloured Gemstone’s Appearance (Roughly)
The most important feature that determines beauty and value of coloured gemstones is: colour.
And judging colour is done best by comparing similar coloured gemstones that are placed together.
That’s because our memory of colour is short.
Eva using a loupe to inspect the hue, saturation and tone of a colour stone.
Only when you see a few coloured stones of the same type, colour, size and shape next to each other, will you be able to pick the best stone from the lot.
What should you look for?
Colour grading consists of 3 elements: namely the grading of (1) the stone’s hue, (2) saturation and (3) tone.
Hue means that you need to try and assess the stone’s main primary and secondary colour... So a stone can be orangey-red or greenish-blue for instance.
Saturation is about judging the vividness of the colour or the lack of colour. Generally, the more vivid a colour, the more valuable a stone will be. The redder a ruby or the bluer a blue sapphire, the better the stone is. Try to avoid hints of brown or grey in the colour. We don’t like those.
Tone relates to the presence of blackness in a stone. Generally, a medium tone is good for many coloured gemstones out there.
On top of colour, by far the most important judgement you need to make, you can look at the clarity and transparency of a coloured stone, the symmetry of the cut, its brilliance (i.e. if it sparkles a lot): all indications of a higher quality gem.
All this means you need to go to several jewellery stores, gem dealers or fairs to train your eye!
You can read more tips for judging the beauty of a coloured stone in my blog post here.
Indeed you'll have lots of things to check.
A coloured gem requires some work. But I promise you’ll love the process!
5. Protect Yourself With A Gemstone Certificate
Today it’s a safe practice to ask for a lab certificate on any ruby, sapphire or emerald purchase over $1000.
An example of a GIA Identification report.
For stones of lesser value I wouldn’t advise to get a certificate. Besides those famous stones, you can also ask for a certificate for some other stones, such as high-quality spinels, certain tourmalines or garnets - provided they have a significant value. Your gemstone vendor might charge a fee to facilitate this. It’ll be worth it. Not only for your own peace of mind but also if you want to sell the stone later on.
Ensure that the certificate:
- comes from an international reputable gem lab, like Gübelin, GRS, GIA, SSEF, AIGS and NEVER from a small, local lab
- states the name of the stone, that the stone is natural and its treatment, if any
- states the origin of the stone (but this is only for those gem aficionados who are keen to know this as you need to pay extra for origin determination)
For instance, origins like Burma (today’s Myanmar) or Ceylon (today’s Sri Lanka) are desired origins for gem collectors and those stones will be sold at a premium.
I personally don’t care about origin so much as long as I have a very beautiful gemstone! So, I’d leave the famous origins (and their extreme premium prices) for the connoisseurs who almost value the provenance more than the actual beauty of a gem.
To sum up all the points we went through: after you've done some research on your own, feel free to ask the vendor about their gemstone policy, especially on gemstone treatments! Don't be intimidated and try to get a specific answer. If that's not possible, go elsewhere. An educated consumer should be welcomed by a knowledgeable gem dealer.
Did you recently purchase a gemstone? What questions did you ask before finalising your purchase? Were you happy with the answers? Let me know, I'd love to hear!
And if you'd like personal guidance from a certified gemologist, gem dealer and jewellery designer, book a complimentary private consultation with me to have all of your questions answered while exploring my collection of fine gems and jewellery pieces! In person or via a video consult ✨